Boiler solenoid valve

As the name implies, boiler solenoid valve refers to the solenoid valve used on the boiler. Boiler solenoid valve mainly refers to the normally closed solenoid valve controlling the water supply of boiling water boiler.

Boiler solenoid valve has closed cavity, open a hole in different position, each hole to connect different tubing, cavity piston is among, both sides are two electromagnets, which face the magnet coil electricity body which side will be attracted to, through to control the movement of the valve to open or close the different discharge of oil hole, and the oil hole is always open, hydraulic fluid will enter the different oil drain, and then through the oil pressure to push the cylinder piston, piston drives the piston rod, piston rod drive mechanism. In this way, mechanical movement is controlled by controlling the electric current break of electromagnet.

GT actuators

GT actuators are divided into positive and negative effects, which is called positive effect, which is the increase of signal pressure and push rod downward. The reaction form is the signal pressure increase, push rod up. The output displacement of this actuator is proportional to the input pressure signal, and the greater the signal pressure, the greater the displacement of the putter. When the pressure is in balance with the counterforce of the spring, the push rod is stable in a certain position, and the pneumatic actuator has two kinds of pneumatic actuator and the straight stroke pneumatic actuator. With the intelligent development of pneumatic actuator, the intelligent valve positioner has become an indispensable accessory product.

43650C connector

The 43650C connector is a kind of component that our electronic engineers often touch. The function of the 43650C connector is very simple: a bridge of communication is set up between the blocked part of the circuit or the isolated closed circuit, so that the current can flow and the circuit can realize the predetermined function. A connector is an indispensable part of an electronic device. You will always find one or more connectors if you follow the path of current flow. The form and structure of connector are ever-changing. With different application objects, frequency, power and application environment, there are various kinds of connectors. For example, the connectors used for lighting lights on the court are quite different from those used for hard disk drives, and those used for firing rockets. However, no matter what kind of connector, it should ensure the smooth, continuous and reliable flow of current.