3v solenoid valve characteristics

3v solenoid valve characteristics

1. Pilot mode: internal or external guidance is optional

2. Sliding column structure with good sealing and sensitive reaction

3. Double-ended electromagnetic valve has memory function

4. Inner bore adopts special processing technology, with small friction resistance, low aerodynamic pressure and long service life

No lubricating oil is required

6. Manual device is attached to facilitate installation and debugging

XINGYURFS drain valve timer

The drain valve timer can set the drainage time and drainage interval freely, no matter the liquid or gas can be easily controlled, and can be applied to agricultural irrigation control, steam power system, commercial water control and sewage system control. The valve body of XINGYURFS drain valve timer is made of high precision and high quality brass.

Boiler solenoid valve

As the name implies, boiler solenoid valve refers to the solenoid valve used on the boiler. Boiler solenoid valve mainly refers to the normally closed solenoid valve controlling the water supply of boiling water boiler.

Boiler solenoid valve has closed cavity, open a hole in different position, each hole to connect different tubing, cavity piston is among, both sides are two electromagnets, which face the magnet coil electricity body which side will be attracted to, through to control the movement of the valve to open or close the different discharge of oil hole, and the oil hole is always open, hydraulic fluid will enter the different oil drain, and then through the oil pressure to push the cylinder piston, piston drives the piston rod, piston rod drive mechanism. In this way, mechanical movement is controlled by controlling the electric current break of electromagnet.

GT actuators

GT actuators are divided into positive and negative effects, which is called positive effect, which is the increase of signal pressure and push rod downward. The reaction form is the signal pressure increase, push rod up. The output displacement of this actuator is proportional to the input pressure signal, and the greater the signal pressure, the greater the displacement of the putter. When the pressure is in balance with the counterforce of the spring, the push rod is stable in a certain position, and the pneumatic actuator has two kinds of pneumatic actuator and the straight stroke pneumatic actuator. With the intelligent development of pneumatic actuator, the intelligent valve positioner has become an indispensable accessory product.

43650C connector

The 43650C connector is a kind of component that our electronic engineers often touch. The function of the 43650C connector is very simple: a bridge of communication is set up between the blocked part of the circuit or the isolated closed circuit, so that the current can flow and the circuit can realize the predetermined function. A connector is an indispensable part of an electronic device. You will always find one or more connectors if you follow the path of current flow. The form and structure of connector are ever-changing. With different application objects, frequency, power and application environment, there are various kinds of connectors. For example, the connectors used for lighting lights on the court are quite different from those used for hard disk drives, and those used for firing rockets. However, no matter what kind of connector, it should ensure the smooth, continuous and reliable flow of current.

3/2 armature set

3/2 armature set design requirements

Armature winding form, should be able to generate enough induction electromotive force, and allow through the armature current, causing the electromagnetic torque and electromagnetic power required, in addition, but also save non-ferrous metal and insulation materials, simple structure, reliable operation.

Urea pump solenoid valve does not absorb what reason?

Urea pump solenoid valve are not suction fluid is mainly are the stamping of electromagnetic directional valve cause defect of elasticity, urea pump in liquid absorption, the reversing valve removed, replaced the spring, then the motor under the one-way valve diaphragm under clear.

4v solenoid valve

Reliability of 4v solenoid valve:

1. Service life, which is not included in the ex-factory test project, belongs to the type test project. In order to ensure quality, we should choose the famous brand products of regular manufacturers.

2. Working system: there are three types of long-term working system, repeated short-time working system and short-time working system. For long - time valve opening only a short - time closure, it is advisable to choose the usual open electromagnetic valve.

3. Working frequency: when the required operating frequency is high, the structure should be optimized for the direct-acting solenoid valve and the power supply should be optimized for the communication.

4. Action reliability

10mm valves

Mirco valve is mini solenoid valve.It can used in single or manifold for different application ,One inlet with several outlets based on manifold ,Mostly used in textile machine ,stocking machine ,Knitting Machine etc ,Also as pilot valve for the pilot type valve or control the mini cylinders. 
10mm valves with CE certified,Long life time ,Low power ,Minifold mirco valve also available ,widely used in Sock knniting micro valve. 
The valve island is a control component composed of several electric control valves.valve islands integrates signal input/output and signal control as a control island. 

​Explosion proof coil

Explosion proof coil for pneumatic valve ,ATEX exproof- coil for Namur valve.IEC EX exproof coil for pneumatic valve ,XK06-014-00295,CNEX13.1600X,II2 D Ex tb IIIC T130℃ Db,height 31 diameter 9 AC220V AC110V DC24V DC12V.

Dual solenoids

In engineering,dual solenoids also refers to a number of converters that convert energy into linear motion. Solenoid operated valve is an integrated original, and the most important component in the interior is electromechanical solenoid. Electromechanical solenoid is an electromechanical original that can be used to operate an air - control valve or hydraulic valve. A solenoid switch is a relay that operates an electrical switch using an electromechanical solenoid.

SBD connector

The SBD connector Bridges the circuit by blocking or isolating the circuit, thereby allowing the current to circulate and the circuit to realize the intended function. The SBD connector is an indispensable part of an electronic device, and you will always find one or more connectors along the path of current flow.

Bistable solenoid valves

Bistable solenoid valves adopts advanced pulse and permanent magnet technology, only the controller switching pulse electrode contact to change the valve open and close state, when an electrical controller, drive the drive disc overcome permanent magnetic core displacement, up and down the disc are obtained under the action of the permanent magnet in the state. Bistable solenoid valves are mainly used for automatic control system or IC card water meter in water, liquid or flammable liquid pipeline.